Signal Conditioning Modules
OP5000 Series
| Model Name | Family | I/O Type | Channels | Mode | Voltage(V) | Current(mA) | Gain |
| OP5251 | Type C I/O Carrier | Digital Inputs and Outputs | 32/32 | Dout Sink Din sink/source |
4-30 | 0-100 | |
| OP5252 | Type C I/O Carrier | Digital Outputs | 64 | Dout Sink | 4-30 | 0-100 | |
| OP5253 | Type C I/O Carrier | Digital Inputs | 64 | Din sink/ source | 4-30 | ||
| OP5311 | Type A Mezzanine | Opto-Isolated Digital Input |
16
|
Sink
|
5-30
|
5-10
|
|
| OP5312 | Type A Mezzanine | Opto-Isolated Digital Output |
16
|
Sink
|
5-30
|
100
|
|
| OP5313 | Type A Mezzanine | Prototype Board |
16
|
|
|
|
|
| OP5320-1 | Type A Mezzanine | Analog Differential Input Amplifier |
16
|
Bipolar
|
|
|
0.5
|
| OP5320-2 | Type A Mezzanine | Analog Output Amplifier |
16
|
Bipolar
|
±16
|
|
2
|
| OP5320-3 | Type A Mezzanine | Analog Output Amplifier |
16
|
Bipolar
|
±16
|
|
1
|
| OP5330 | Type B Mezannine | Analog Output |
16
|
Bipolar
|
±16
|
|
|
| OP5340 | Type B Mezannine | Analog Input |
16
|
Bipolar
|
±20 to ±100
|
|
|
| OP5341 | Type B Mezannine | Analog Input | 16 | +/- 5v, +3.3v | |||
| OP5350 | Type B Mezannine | Prototype Board |
16
|
|
|
|
|
| OP5353 | Type B Mezzanine | Digital Input | 32 | Sink or Source | 4-30 | 3.6 | - |
| OP5354 | Type B Mezzanine | Digital Output | 32 | Sink or Source | 4-36 | +/-50 | - |
| OP5961 | External Board | High Current Relays |
8
|
Contact
|
250VAC - 30VDC
|
8000
|
|
| OP5511 | External Board | High Voltage and High Current Input Module | 8 | Inputs | 600V | 50 Amp. |
Test-Drive Modules (OP6000 Series)
Test-Drive Modules are compatible with the Test-Drive Simulator Chassis
|
Module Name |
Function | Applications | Voltage range | Current Limit or Power Limit | rms Current protection | Short Circuit protection |
| BASE MODULE with POWER MODING | Digital outputs (high current) | Ignition, Crank, other power bus simulation | 0 to 32 volts | 25 Amp Continuous | No | Yes |
| PULSE DRIVEN LOAD MODULE | Analog/Digital/PWM inputs | Frequency Measurement Speed Sensor Measurement | 0 to 32 volts | N/A | N/A | Yes |
| ANALOG SENSORS MODULE | Analog outputs | Pressure transducer, condition temperature (engine coolant), Potentiometer (pedal sensor, volume) | 0 to 27 volts | 200mA continuous 300mA pulsed | Amplifier Thermal Protection | Yes |
| Current Limit Protection | ||||||
| SWITCH MODULE | Digital outputs | Any switch, Gear level, Doors locked, Seat belt on, Brake/Glass limit switch | 0 to 28 volts | 2 Amp continuous | No | Yes |
| PULSE OUTPUT MODULE |
Digital outputs Analog outputs |
Wheel speed sensor, variable frequency | -12 to 12 volts (analog) | 200mA continuous 300mA pulsed | Yes | Yes |
| 0 to 28 volts (digital) | ||||||
| RESISTIVE SENSOR MODULE | Resistor Simulation 5Ω to 2MΩ
|
Temperature, Thermistors | 0 to 24 volts | 250 mW | Yes | Yes |
| REFERENCE PULSE GENERATOR MODULE | Engine specific Signals Generators (1 analog output /24 Digital Input and 13 Digital outputs) |
Crank, Cam spark, injector knock Timing | -5 to 5 volts (analog) |
200mA continuous 300mA pulsed |
Resettable Thermal Fuse Shutdown | Yes |
| 0 to 28 volts (digital) |
